HBS - Capacitor discharge stud welding with tip ignition

HBS capacitor discharge power units provide outstanding reductions in costs and time. Every weld is precise avoiding any need for costly machining. The recipe for success: Extremely short welding time! (1 to 3 msec). No additional welding products are needed.

HBS Efficient Technology

Phone +49 8131 511-0

Get in touch with us by using our contact form

Capacitor discharge stud welding

Stud welding units

Pegasar 500 accu Pegasar 500 accu Insulation CDi 1502 CDi 2302 CDi 3102 CDMi 2402 CDMi 3202 ACCU-TWIN

Stud welding guns

C 06-3 CA 08 C 08

Download

Download: Brochure - CD Capacitor discharge stud weldingDownload: Brochure - CD Capacitor discharge stud welding

CDi 2302

E-DBL_CDi_2302__92-10-2302B__Stand_2015-05_EffT.pdf,HBS_Flyer_CDi-Serie_2014_EN_230-115V_02.pdf DOWNLOAD - TECHNICAL DATA SHEET
E-DBL_CDi_2302__92-10-2302B__Stand_2015-05_EffT.pdf,HBS_Flyer_CDi-Serie_2014_EN_230-115V_02.pdf DOWNLOAD - FLYER CDi Series
CDi 2302
Welding range M3 to M8 (M10 limited), dia. 2 to 8 mm (dia. 10 mm limited)
Welding material Mild steel, stainless steel, aluminium and brass
Welding rate M3 = 33 studs/min. (Charging voltage 60 V)
M8 = 12 studs/min. (Charging voltage 170 V)
(M10 = 9 studs/min. (Charging voltage 210 V))
Capacitance 99 000 µF
Welding time 1 to 3 ms
Energy 2 400 Ws
Charging voltage 50 to 220 V (stepless voltage regulation)
Power source Capacitor
Dimension LxWxH 480 x 205 x 250 mm (without handle)
Weight 17 kg
Primary power 230 V/115 V, 50/60 Hz, 10 AT
Cooling type F (temperature controlled cooling fan)
IP-Code IP 23
Order No. 92-10-2302B


Suitable stud welding guns:

C 08 CA 08

C 08

C 08

C 08

Especially suitable for thin metal sheets from 0.5 mm.
ISO - especially suitable for welding on insulation pins with flange and ignition tip.

  • Stud length freely adjustable (up to 40 mm; from 40 mm with tripod).

Welding range:

M3 to M8, dia. 2 to 8 mm
(other dimensions on request)

Stud material:

Mild steel, stainless steel

CA 08

CA 08

CA 08

Especially suitable for thin metal sheets from 0.5 mm.

  • Integrated lift and spring-loaded adjustment.
  • Stud length freely adjustable (up to 40 mm; from 40 mm with tripod).

Welding range:

M3 to M8, dia. 2 to 8 mm
(other dimensions on request)

Stud material:

Mild steel, stainless steel, aluminum, brass

Description

 

Unbeatable new power pack

  • With efficient inverter-capacitor charging technology
  • Enormous time and energy savings (30 % less energy!)
  • Highest cycle sequence of its class (up to 40 studs/min.)
  • 20 % energy reserve due to 220 V charging voltage
  • Simple operation & minimal weight (20 % lighter than previous model)
  • Extreme long life due to robust and functional industrial design

Highest level of quality and safety

  • IP 23 - Highest possible protection of its class
  • Capacitor formation recorded - Quality control for consistent capacitor quality through automated formation
  • Shock-proof capacitor battery - No contact of the capacitors to the device housing; sparkover (short circuit) is therefore not possible!
  • Cooling channel - Protects the electronic components from getting soiled. Ideal cooling of the inverter charging p.c. board for high sequence cycles.